Brandt VF 300 Series, Руководство по эксплуатации

Страница: 19 / 27

37
36
Loading the dishwasher
① ①
② ②
Adjusting to the HIGH POSITION :
Gently lift the basket until you hear
the first “Click ” on both sides.
Adjusting to the LOW POSITION:
Lift the basket at the back on both sides
( “Click” ) and then gently lower it.
Depending on the model: when loading large plates into the lower
basket, you may have to adjust the height of the upper basket. This
can be done even when the basket is full.
Check that the slides are both at the same height and that the basket is
level.
Place glasses, cups and bowls facing downwards.
The upper basket
This basket is designed in particular to
take: glasses, cups, ramekins, small
salad bowls, bowls, saucers, etc.
Arrange the items methodically to save
space (a row of glasses, cups, bowls,
etc.).
Selecting a washing programme
Check that the
power cable is plug-
ged in the socket and that
the water tap is open.
The meaning of the programme symbols is shown on the
adhesive label included in your documents pouch. If you so
wish, you can stick this on the inside of the dishwasher door.
Refer to the Programmes table on the
following pages to determine the best
programme for the amount of washing
up and how dirty it is.
Press the “ On / Off ” button to switch
the machine on.
Press the button for the programme you
have selected :
Press the “ Start ” button.
The “Washing” light illuminate.
The programme begins when you
close the door.
On / Off
Start
Take care not to press 2 or 3
wash programme buttons at the
same time.
If you make a wrong selection, simply
press the same button again to release it.
You can get a short soak cycle without pressing a pro-
gramme button. Simply authorise this by pressing “Start”.