Brandt Fridge, Инструкции по эксплуатации и монтажу

Страница: 40 / 48

40
Your appliance may be fitted a function
enabling 20 ice cubes to be produced in the
refrigerator compartment.
The icemaker consists of a fixed element
placed inside the refrigerator and a removable
element containing the ice cube trays.
To use this correctly, follow the instructions
below:
- Remove any food placed in front or that
could hinder your extracting the removable
element.
- Grasp the removable element by the handle
and pull it out (Drawing R1).
- Remove the ice cube trays (Drawing R2).
- Fill the trays ¾ full with water.
- Return the trays to their housing; to avoid
wetting the areas below, ensure that you keep
the removable element in a vertical position.
- Return the removable element to the
refrigerated compartment and push it fully into
its housing (until you hear the click as it locks
in place). Insert it gently to avoid spilling the
liquid in the trays.
- It is suggested to regulate the temperature
to 4°c or 5°c (see section “Starting on and
adjusting the appliance).
- Wait approximately 24 hours (the time may
vary depending on the ambient temperature).
- Grasp the handle and take out the removable
element (Drawing R1).
- Remove the ice trays (Drawing R2).
- Extract the ice cubes simply by pressing on
the trays.
- Remove the Ice Cube system from its
housing once a month for one day to ensure
that it defrosts completely.
If your appliance is equipped with the "ICE CUBE" and "SUPERCOOL" functions :
Activating the "SUPERCOOL" function (see "Starting and adjusting the appliance" section) enables
you to obtain ice cubes more quickly (the time required may vary depending on the ambient
temperature).
Ice maker (depending on the model)
EN
Drawing R1
Drawing R2