Brandt FP562BB, Руководство пользователя

Страница: 64 / 124

64
4 / USING YOUR APPLIANCE EN
- Your oven’s programmer can be used as an
independent timer that allows you to count
down a time without operating the oven.
In this case, the timer display has priority over
the clock display.
- Press the “
“
TOUCH CONTROL
(fig.1) until
the timer symbol begins flashing
-> 0.00 and a small hourglass both flash.
- Adjust the chosen time by pressing the
touch controls
+ or
-
(fig.2).
- Press the touch control “ “ to validate, or
wait for a few seconds.
Warning
It is possible to change or cancel the timer at any time.
fig.1
fig.2
USING THE TIMER FUNCTION
•
DISPLAY BRIGHTNESS
•
You can adjust the brightness of your display. To
do this:
- Set and validate the time on your programmer
to 0:10 (fig.1).
- Press simultaneously on the + and
- touch con-
trols for about ten seconds until “CO” is dis-
played, in order to enter the adjustment mode
(fig.2).
- Press the touch controls + and
- in order to ob-
tain the desired brightness.
After having adjusted the brightness to your lik-
ing, wait a few seconds and return your pro-
grammer to the current time of day.
fig.1
fig.2
The display stops flashing after a few seconds and the timer starts working, counting down the
time in seconds.
Once the time has expired, the timer emits a series of beeps to notify you.
The beeps can be stopped by pressing any touch control.
99643801_A_ML.qxp 22/05/2007 16:31 Page 64