Brandt BFL584YNW, Инструкция по эксплуатации

Страница: 29 / 144

8
thickness exceeds 5-6 mm) and
periodically cleaning the condenser
(see "Maintenance your device ").
• Regularly check the door seals
and make sure that they always
close effectively. If this is not the
case, please contact service after
sales service.
• Do not let it set at too low a
temperature.
• Not fulfilling with drawers, bins
and shelves arrangement could lead
to increased energy consumption.
WARNING:
If the unit was shipped to home in a
horizontal position, place it vertically
and wait two hours before plugging
it in. A small amount of oil may
have flowed into the refrigeration
circuit, you need to give it time to
flow back towards the motor before
connecting the appliance, otherwise
you may damage it.
Before any maintenance, disconnect
the power plug. Do not pull the
power cable but directly enter the
profile.
CLEANING AND MAINTENANCE

Before cleaning, unplug the
appliance and turn off the power.

Do not clean the appliance with
metal objects, a steam system,
volatile oils, organic solvents or
abrasives.

Do not use sharp objects to
remove ice. Use a plastic scraper.

To replace the light bulb, if
operation is possible by the user
himself, please refer to the
"Maintenance" of this manual.
Always be sure to unplug your
appliance before.
WARNING: If the appliance is
equipped with a LED lighting, it can
only be replaced by a qualified
technician
.