BRANDLUXE E500A SERIES, Руководство по установке

Страница: 40 / 49

LTE Outdoor CPE
EN-40
 Port

External : Enter the external port to be redirected to Internal port .

Internal : Enter the port used by the device to receive data.

Protocol : Select the protocol from the drop-down list.
 Single Port Forward

Firewall enable or disable : Select Enable from the drop-down list
to enable firewall.
4. Click APPLY to save the configuration rules.
Configure Port Range Forward
Port Range Forward allows users on the Internet to access this server by using
the WAN port IP address and the pre-defined range of ports. When users send
these types of request to your WAN port IP address via the Internet, the CPE
will forward those requests to the appropriate servers on your LAN. Configured
port range forward settings are listed on the table at the bottom of the screen.
1. Click Advanced Mode tab and select NAT .
2. Click Port Range Forward .