LTE Outdoor CPE
EN-26
Configure DHCP Services
Configure your CPE to use the Dynamic Host Configuration Protocol (DHCP).
With DHCP service, your CPE will automatically assign an IP address to each
computer on your network.
1.
Click
Basic Mode
tab and select
Network Settings
.
2.
Click
DHCP Services
.
3.
Modify the necessary settings.
DHCP Server
: Select to enable/disable the DHCP server.
Start IP Address
: Assign the first IP from the range to be leased.
Maximum Number of Users
: Enter the maximum number of IP
addresses to be leased.
Client Lease Time
: Set the amount of time that the IP address will still
be reserved for the computer after it has been disconnected from the CPE.
4.
Click
APPLY
to save changes.
Содержание E500A SERIES
Страница 1: ...EN 1 P N 65012500011 Rev C ...
