BRANDLUXE E500A SERIES, Руководство по установке

Страница: 25 / 49

LTE Outdoor CPE
EN-25
Configure CPE IP Settings
Modify the IP address configuration of your CPE.
1. Click Basic Mode tab and select Network Settings .
2. Click CPE IP Settings .
3. Modify the necessary settings.
 IP Address : Enter the IP address of the CPE.
By default, the IP address is 192.168.168.168 .
 Subnet Mask : Display the mask used to divide the IP address.
 Device Name : Type a device name to use to access the web-based
utility instead of entering the IP address on the address bar. In the case
of the above illustration, you may type
http://E500series.CPE on the
address bar to access the web-based utility.
4. Click APPLY to save changes.