Prior to disassembling the base as detailed in step (A). Take note of the black plate that is attached to the
bottom of your weighted base.
This plate will act as a washer for the nuts and will assist in increasing the stability of the pole.
Once the nuts and bolts are removed, ensure that this black plate remains in place.
Prior to attaching the post to the top of the weighted base (B). Ensure that the black plate is installed properly
at the bottom of the base.
Once the pole is attached to the base with the three nuts and bolts provided, the bottom of the base should
look like photo (iii). Ensure the bolts are not over tightened to
the plate.
Once all seven nuts and bolts are properly installed, the bottom of your base with the washer should look like
picture (iv). Ensure that bolts are snug, but not over tightened or it will warp the black plate.
ADDENDUM TO BRANDER PATIO HEATERS - TR6026NG, TR6029NG
Thank you for your purchase of the Brander Patio Heater. Prior to assembling this patio heater, please read
through these additional in-depth instructions. This will improve the stability of your patio heater.
6
