703739-1 Revision D Spider Glazier 2200 Operator's Manual Issue Date: 2019-Jan-25
Page 5 of 27
1. SAFETY
a) Instructions for Safe Operation
Before using the Spider Glazier 2200, learn the procedures described in this manual. Any operation in violation
of these instructions may result in bodily injury or death.
Every year, workers are injured, become disabled, or are killed because of carelessness or
because they did not understand how to correctly operate the equipment they were using. Do
not become one of them. Know how to use this equipment and prevent accidents.
NEVER operate equipment that you do not understand. You may cause accidents, resulting in
injury or death to you or people around you.
This instruction manual is not all inclusive. It is impossible to anticipate every conceivable way this equipment
may be used, or every hazardous situation. It is very important that you determine for yourself whether the
situation is safe. You must understand the operating characteristics of both the hoist and gantry. You must
understand how the equipment will operate in your application. Before use, you must be certain you are not
creating a situation that may endanger yourself or others, or cause damage to property. Call your supplier if
you have any questions concerning this equipment.
1. Read and understand this manual
BEFORE
using this equipment.
2. Additional copies of this manual are available from your Spider operations center. It is the duty of the
employer to provide each operator with a copy of this manual.
3. Setup and use must comply not only with the instructions in this manual but also with federal
OSHA 29 CFR standards, as well as applicable state and local codes in force at the location of
application. It is the user’s responsibility to review applicable state or local codes or regulations
pertaining to general safety or use of this equipment, and it is the user’s responsibility to resolve any
conflicts between codes and/or regulations.
4. The Spider Glazier 2200 is designed to be assembled by a minimum of three workers and typically
operated by three: a loader (on the lowest level), a positioner (who operates the remote from an
intermediary level above the loader) and a spotter (stationed at the hoist on the top level).
5. The Spider Glazier 2200 is designed to lift a maximum load of 2,000 lb.
Do NOT operate without
adequate counterweights.
Refer to “Section 5. Working Configurations” on Page 22 for
information on the amount of counterweights required with specific loads.
6. Secure the foot-operated caster brakes before loading counterweights. The caster brakes are designed
to maintain the position of the Spider Glazier 2200
on a level surface
.
Do NOT operate the Spider
Glazier 2200 on a slope.
7. The Spider Glazier 2200 is powered by a DualLift M1009 material handling hoist, which is NOT rated
for manlifting.
Do NOT use hoist for lifting personnel.
8. Do NOT allow personnel in the hoistway or within 10 feet on either side of it. Clearly mark and
cordon off the hoistway.
