Brainworx Suhr PT100, Руководство к плагину

Страница: 9 / 19

9
Suhr PT100
Plugin Manual
1
Host BPM
Click on the BPM number in the GUI and a pull-down menu opens up. Now
you can select musical values like half notes, quarters, triplets, etc. All
values will be based upon the tempo that is being displayed in the BPM
window. The tempo will be synced with the tempo of your audio session
automatically.
2
Mix
Use this parameter to control the amount of dry (unprocessed) vs. wet
(processed) signal. The Mix parameter blend in as much delay signal with
the dry amplifier sound as desired. For unobtrusive delays we recommend
settings around 10%, heavier effect sounds may require settings of 50%
or more.
3
Feedback
This controls the number of repeats. While a setting of 99% will result in
an almost infinite delay loop, a typical setting for a rock lead sound may
be around 25%.
* Note: Custom control, not automatable
4
Lo-Fi
Use this parameter to add creative destruction to your delay signal.
With the Lo-Fi knob you control the amount of internal distortion, the
resampling quality, etc. The higher you go the worse the quality gets from
a pure technical stand point... but the more interesting it may sound for
many guitar sounds and styles.
Recording Chain
Brainworx Advanced IR Technology
Simply select a speaker and a complete studio setup by browsing through
the Recording Chains pull-down menu.
In the past two decades Brainworx owner Dirk Ulrich has produced and
recorded with members of Dream Theater, Toto, Michael Jackson and with
many more famous and infamous acts. The Brainworx Studio in Germany
(www.brainworx- studio.de) is equipped with one of only nine NEVE VXS
72 consoles ever made, and it also hosts some of the best outboard EQs
and mic pre-amps available.
2 3 4 1