Brainworx Suhr PT100, Руководство к плагину

Страница: 7 / 19

7
Suhr PT100
Plugin Manual
Amp Filters
1
Tight Filter
Three-way switch: ”Pre”, ”Post” and ”Off”. With the Tight filter you can cut
Low frequencies of either the DI guitar signal (Pre) or the processed amp
output (Post).
• Pre: If your pickups produce an unintentional rumbling bass sound you
can filter the low end before the DI sound even hits the amplifier.
• Post: If you want to cut some of the low end of your amplifier setting
(maybe even only temporary) you can use this studio quality high pass
filter to reduce the bass.
• Off: When set to Off the Tight filter is in bypass mode.
2
Tight Frequency
With the Tight filter you can cut Low frequencies of either the DI guitar
signal (Pre) or the processed amp output (Post).
3
Smooth Frequency
With the Smooth filter you can cut high frequencies of either the DI guitar
signal (Pre) or the processed amp output (Post).
4
Smooth Filter
Three-way switch: ”Pre”, ”Post” and ”Off”. With the Smooth filter you can
cut HIGH frequencies of either the DI guitar signal (Pre) or the processed
amp output (Post).
• Pre: If your pickups catch a lot of hiss or noise you can filter the high end
before the DI sound even hits the amplifier.
• Post: If you want to cut some of the high end of your amplifier setting
(maybe even only temporary) you can use this studio quality low pass
filter.
• Off: When set to Off the Smooth filter is in bypass mode.
2 3 1 4