Brainworx Suhr PT100, Руководство к плагину

Страница: 11 / 19

11
Suhr PT100
Plugin Manual
1
Auto & Bar selection
If you are trying to find the best sounding Recording Chain for your song
it can be a hassle to have to play a few chords, grab the mouse to select
the next Recording Chain, play a few notes again, grabbing the mouse
again, etc.
For this reason the PT100 offers you Auto mode: Just select a pattern (1
Bar, 2 Bars or 4 Bars) and the Plugin will activate the available Recording
Chains automation, following the actual tempo setting of your DAW. You
can now play uninterrupted and simply listen to the sound of the various
Recording Chains as the Plugin switches through all of them every single
bar, every two bars or every four bars, depending on your setting. As soon as
you hear the speaker setup you like best just stop Auto mode by clicking
the AUTO button again and manually select the desired Recording Chain.
Afterwards just fine-tweak the Tone Section and Gain and there you are.
2
RC Info
The RC Info feature showing you exactly what kind of setup was used to
produce the Recording Chain you selected.
3
RC Off
This button lets you bypass the entire Recording Chain section. Use then
your own mic‘d cabinet or external IR loader.
4
Input Gain
If you want to drive the input of the Suhr PT100 preamp harder or softer
you may adjust the input gain to your liking. Some single coil pickups from
older or vintage guitars may deliver low level output that can be compen-
sated with the Input Gain.
The opposite goes for a lot of heavy metal style humbuckers. If you have
recorded the DI signal too hot or if you are using other Plugins before
entering the Suhr PT100 amp Plugin you may want to dim the input signal.
With most standard guitars you can and should leave the Input Gain at 0
(zero) though.
1 4 3
2