Brainworx Suhr PT100, Руководство к плагину

Страница: 18 / 19

18
Suhr PT100
Plugin Manual
Factory Presets
We have made a lot of presets for the PT100 amp plugin, many of them have
been made to work perfectly with classic guitars like Strats, Teles or Paulas.
All of the factory presets offer A/B/C/D variations, do try them out!
This effectively quadruples the factory sounds you can browse through,
and many similar amp settings sound quite different with different Filter
or Delay settings.
These presets are only intended to give you an easy start and to demo
some of the tones you can get out of the PT100 amp plugin.
Creating your own Sounds & Presets
When you start to create your own sounds the most important elements
to adjust are the Drive, Recording Chains and the Tone Stack.
(Bass, Middle, Treble, Presence, etc.)
• Set the controls of the Tone Stack to the center position (’12-o-clock’).
• Play through as many Recording Chains as you like and pick the one that
sounds closest to what you are looking for before altering the knobs.
• Once you found the Recording Chain you like best for your sound, start
tweaking the Tone Stack and Drive to fine tune your amp settings.
• Add Delay or activate the Filters, the Noise Gate, etc. for variations of
your sounds.
• Plug in, Rock out!
Experiment, be creative. We are confident that the different tone selec-
tions of the amp and the huge selection of Recording Chains will offer
you many possible combinations that will sound great on a big variety of
musical styles and genres.
Combine the PT100 amps with other plugins (dynamics, effects, room
simulation), and you will be able to create countless world-class produc-
tion-ready guitar sounds in the box. Enjoy.