Horizontal Serialization Examples (110-Block and BIX-Block Labels)
The default justification is Center/Center; however, justification can be adjusted using the
JUST
(justification) softkey.
Note:
Examples below may not be drawn exactly to scale.
Note:
Rotation cannot be adjusted on 110-Block or BIX-Block labels.
Example—2 Pair
1 2 3 4 5 6 7 8 9 10 11 12
13 14 15 16 17 18 19 20 21 22 23 24
Example—3 Pair
1 2 3 4 5 6 7 8
9 10 11 12 13 14 15 16
Example—4 Pair
1 2 3 4 5 6
7 8 9 10 11 12
Example—5 Pair
1 2 3 4 5
6 7 8 9 10
Note:
Non-printable zones are included on each end (0.2" at front end of strip, remainder at
end of label, varied depending on pair type).
Backbone Serialization
To perform backbone serialization, follow the first three steps for performing
Horizontal
Serialization
, then do the following:
Press the
BBONE
softkey.
Step 1.
Step 2.
Enter a numeric (0–9) start value (three digits maximum value) and press
ENTER
.
Note:
Any characters previously entered via the DataComm & T-Block Menu will
be overwritten.
32
User Manual