background image

Installation 

P.O. Box 309 

Menomonee Falls, WI 53052 USA 

800 BRADLEY (800 272 3539) 

+1 262 251 6000

www.bradleycorp.com

215-1674 Rev. F: ECO 19-03-024

© 2020 Bradley

Page 1 of 3 

1/8/2020

S59-1005SR

Bradley Equa-Flo

 HD Ligature 

Resistant Pressure-Balancing  

Shower Valve

Table of Contents

Safety Information  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 2
Supplies Required  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 2
Rough-In   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 3
Connect Valve and Adjust Valve Temperature .  .  .  .  .  .  .  .  .  . 4
Attach Escutcheon and Handle  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 4

Read the instructions in this manual before beginning installation. 

Save these instructions and refer to them for inspection, 

maintenance, and troubleshooting information.

For questions regarding the operation, installation or maintenance of this product, visit bradleycorp .com or 
call 800 .BRADLEY (800 .272 .3539) .

Product warranties and parts information may also be found under “Resources” on our website at 
bradleycorp .com .

For use with shower heads rated 

at 5.7 L/min (1.5 gpm) or higher.

Содержание Equa-Flo S59-1005SR

Страница 1: ...ve and Adjust Valve Temperature 4 Attach Escutcheon and Handle 4 Read the instructions in this manual before beginning installation Save these instructions and refer to them for inspection maintenance and troubleshooting information For questions regarding the operation installation or maintenance of this product visit bradleycorp com or call 800 BRADLEY 800 272 3539 Product warranties and parts i...

Страница 2: ...water supply lines have been flushed and are then completely turned off before beginning installation Debris in supply lines can cause valves to malfunction Installation of this system must be completed by a qualified plumber in compliance with all national and local codes Compliance and conformity to local codes and ordinances is the responsibility of the installer Should these codes differ from ...

Страница 3: ...ey Representative and ask for S45 2264 Back to Back Rotor Kit to swap out the rotor on the reversed side Back to Back Installation 6 1 2 165 w Stops 2 1 2 64 w o Stops Hot Cold 1 3 4 46 mm Rough in 1 WARNING In order for the shower to be ligature resistant the valve inlet and outlet rough ins must be 4 1 8 2 1 8 53 1 1 2 38 1 1 2 38 48 1219 Above Finished Floor 2 1 4 56 4 103 4 5 8 119 Finished Wa...

Страница 4: ...ws are tightened equally WARNING The temperature limit stop has been factory preset for maximum temperature operation Failure to adjust the limit screw to a safe shower temperature could result in the user being scalded Connect Valve and Adjust Valve Temperature 2 Attach Escutcheon and Handle 3 D Apply 100 silicone caulk to all screw backsides prior to escutcheon installation A Slide handle over s...

Отзывы: