8
9/28/2017
Bradley •
215-1595 Rev. E; ECN 17-00-014
S93-572, S93-573, S93-574
Installation
4 Connect Supplies
A
Connect the 1/2" compression female
end of the stop valves to the rough-ins .
B
Connect the supply hoses to the stop
valves and to the Navigator
®
. The hose
attached to the hot water inlet of the
Navigator (marked with the letter "H")
must be connected to hot water rough-in .
The letter “H” on the Navigator Mixing Valve indicates
hot water supply inlet.
The thermostatic mixing valve requires at least 115°F
water from the hot water side for proper operation. As
with all lavatories, there will be a delay in obtaining
warm water. If the hot water is too far away from the
washfountain, a circulating pump may be required.
Stainless Steel Flex
Hose (269-2053)
Stop (S27-340)
Hot
Cold
