7
Bradley •
215-1595 Rev. E; ECN 17-00-014
9/28/2017
Installation
S93-572, S93-573, S93-574
3 Assemble the Trap
A
Insert the drain plug in the hole in the
bottom of the BradMate
™
bowl as shown .
B
Beneath the bowl, install the rubber
washer onto the drain plug .
C
Thread the waste elbow onto the drain
plug .
D
Insert the two rubber washers included
with the P-trap into the tube ends .
E
Connect one end of the P-trap to the
waste elbow and the other end to the
1-1/2" drain pipe (supplied by installer) .
The drain pipe should already be stubbed
out 1" from the wall at the location.
F
Insert the strainer into the drain plug
opening inside the bowl and push the
strainer firmly down into place . FASTEN
WITH SCREW PROVIDED .
#8-32 Screw
(160-319)
Strainer
(P16-075)
Drain Plug
(P16-072)
Bradmate Bowl
Rubber Washer
(125-001DP)
Waste Elbow
(A15-004)
1-1/2" P-Trap
(269-1697)
