Aerada 1000/1100 Series
Installation
6
5/21/08
Bradley
Corporation
• 215-1628 Rev. A; EN 08-201
Enabling “Manual Setting Mode”
A battery model is shown in the following example. These instructions apply
to all models. After 30 minutes, the “Manual Setting” mode will be disabled
automatically and all settings will be saved.
Prerequisites
• Water supply valve is open
• Battery is full (LED does not blink) for DC faucets
• AC power is on for AC faucets
1
Remove shut-off screw.
2
Remove mixer handle (only for faucets with external mixer).
3
Remove housing vertically.
4
Remove battery from battery holder.
5
The following procedure (a, b, c) must be done three (3) times in a row.
a
-
Re-insert
battery
b
-
LED
lights
up
c - Remove battery immediately after LED switches off
6
Insert battery.
7
Mount housing vertically.
8
Mount shut-off screw.
a
c
b
