Installation
Aerada 1000/1100 Series
Bradley Corporation
• 215-1628 Rev. A; EN 08-201
5/21/08
5
Start-up Operation
Prerequisites
• Faucet is mounted
• Water supply is on
• Water supply lines are fl ushed properly
• For AC faucets, power outlet is installed.
1
Fully open supply valves.
2
Remove all items from sink.
3
Remove protective covering from sensor.
4
Wait for 15 seconds for the faucet to calibrate to its environment.
Result:
The faucet is now activated.
15 sec.
Test Function
1
Hold hand in front of sensor.
> Water fl ow starts
WARNING
Hot water may burn your skin.
Hold hand carefully under water and remove quickly
2
For faucets with external mixer, turn mixer handle from cold to warm.
> Water temperature increases
3
Remove
hand.
> Water fl ow stops
Result:
The function is now tested.
