Installation
Aerada 1000/1100 Series
Bradley Corporation
• 215-1628 Rev. A; EN 08-201
5/21/08
13
7
Install shut-off screw.
8
Install mixer handle (for faucets with external mixer only).
Result:
The battery is now replaced.
Cleaning or Replacing Inlet Filter
1
Close supply valves.
2
Disconnected braided hoses and clean or replace fi lter
(for a new fi lter, see “common replacement parts”).
3
Connect braided hose with fi lter to supply valve
Cold water > white label Hot water > no label
Result:
The fi lter is now cleaned or replaced.
Adjusting Hot Water Limiter (External Mixer)
The proportion of hot water can be switched from approximately 85% to 95%
(or reverse) depending upon inlet water pressures and temperatures. The default
setting is 85%.
WARNING
Hot water may burn your skin.
Hold hand carefully under water and remove quickly
1
Remove mixer handle.
2
Carefully pull out hot water limiter from handle (using pliers) and reverse by
180°.
>
Settings of hot water limiter (View from placement in mixer handle)
3
Mount mixer handle.
Result:
The proportion of hot water is now changed.
180°
95%
85%
