Bradley Aerada 1000 Series Скачать руководство пользователя страница 10

Страница: 10 / 14

Aerada 1000/1100 Series

Installation

5/21/08

Bradley

Corporation

• 215-1628 Rev. A; EN 08-201

Problem

Possible Cause

Solution

No water fl ow

Supply valves are closed

Open supply valves

Aerator is blocked or dirty

Clean or replace aerator (See "Care and Maintenance")

Inlet water line fi lter is dirty or
blocked

Clean or replace fi lter (See "Care and Maintenance")

Braided hose is kinked

Eliminate braided hose kink

No external water pressure

Check water pressure/Provide water pressure

Battery is drained (DC
faucets only)

Replace battery (See "Care and Maintenance")

Battery contacts are
corroded (DC faucets only)

Clean contacts or replace battery
(See "Care and Maintenance")

Reverse battery insertion

Insert battery correctly

Connector between
transformer and power
adapter unplugged (AC
faucets only)

Plug connector

Power adapter contacts are
corroded (AC faucets only)

Clean contacts

Connecting cable is kinked
or broken (AC faucets only)

Replace defective parts (See "Replacement Parts")

No external power supply
(AC faucets only)

Check external power supply/Provide power supply

Shut-off screw is missing or
defective

Replace shut-off screw (See "Replacement Parts")

Solenoid valve inoperable

Replace solenoid valve (See "Replacement Parts")

Faucet is in cleaning mode

Wait for cleaning mode to end (appr. 90 seconds)

Electronics module
inoperable

Contact Bradley technical service or replace power adapter (See
“Replacement Parts”)

Power adapter defective (AC
faucets only)

Contact Bradley technical service or replace power adapter (See
“Replacement Parts”)

Sensor distance is not
adjusted properly

Reset sensor monitoring range
Remove and re-install shut-off screw. Do not disturb sensor scanning
procedure (wait until water fl ow stops and LED switches off)

Infrared window sctatched
or dirty

Clean window with smooth cloth

TROUBLESHOOTING

Содержание Aerada 1000 Series















Результаты поиска

Содержание Aerada 1000 Series

Отзывы:

Бренды по названию

Популярные бренды

Bradley Aerada 1000 Series, Руководство по установке

Результаты поиска

Содержание Aerada 1000 Series

Отзывы:

Бренды по названию

Популярные бренды