Bradley Aerada 1000 Series Скачать руководство пользователя страница 1

IMPORTANT!

Read this entire installation manual to ensure proper installation. When 
fi nished with the installation, fi le this manual with the owner or maintenance 
department. Compliance and conformity to local codes and ordinances is 
the responsibility of the installer.

Separate parts from packaging and make sure all parts are accounted for 
before discarding packaging material. If any parts are missing, do not begin 
installation until you obtain the missing parts.

Make sure that all water supply lines have been fl ushed and then completely 
turned off before beginning installation. Do not use pipe dope. Debris in 
supply lines can cause valves to malfunction.

Product warranties may be found under “Products” on our web site at 
www.bradleycorp.com.

Installation

THIS
SIDE

UP

Packing List




P.O. Box 309, Menomonee Falls, WI 53052-0309
Phone: 1-800-BRADLEY    Fax: 262-253-4161
www.bradleycorp.com

Installation

215-1628 Rev. A; EN 08-201
© 2008 Bradley Corporation
Page 1 of 14 

5/21/08

Aerada 1000 Series Faucet

S53-326 AC Gooseneck
S53-327 DC Gooseneck

Aerada 1100 Series Faucet

S53-328 AC High Arc Infrared
S53-329 DC High Arc Infrared

Table of Contents

Supplies Required . . . . . . . . . . . . . . . . . . . . . . . 2
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Manual Settings  . . . . . . . . . . . . . . . . . . . . . . . . 6
Adjustments. . . . . . . . . . . . . . . . . . . . . . . . . . .9
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . 10
Care and Maintenance  . . . . . . . . . . . . . . . . . 12
Multi-Faucet Transformer Wiring . . . . . . . . . 14

Aerada 1000

Aerada 1100

Содержание Aerada 1000 Series















Отзывы: