Primary Controls:
Joystick:
This is a 3 axis joystick and controls Pan, Tilt & Zoom functions.
Focus & Iris Buttons:
Focus aind Iris can be either manually adjusted or selected to AUTO mode.
Aux. Button: (pre-set positioning)
This enables access to auxilliary functions. eg. 4 preset positions. When pushed the 4
numerical buttons will illuminate to prompt for a selection. To command the camera to
GOTO
a
preset position just press a button 1-4. To
STORE
a preset position; Move the camera to the
position - push AUX then push and hold a button 1-4.
White Balance Button:
Pushing this button then offers a selection from the 1-4 buttons.
1.
Auto White
2.
3200k
3.
5600k
4.
Auto Tracing White
Reverse Button:
The directions of pan and tilt are reversed with this button. This sequences the pan & tilt
directions through the 4 possibilities.
Water Button:
This dedicated button can perform a number of functions depending on the camera. When used
with the Elipticam it aims to de-focus any water droplets on the dome. It is generally suitable
only for daytime use.
Numerical Buttons 1 - 4
These are primarily used to select the desired camera. Usually the Elipticam - if fitted - will be
designated as Camera 1. These buttons are also used in conjunction with the buttons above
when required to select from the available options.
IR Button:
This performs 2 functions simultaneously when used with a
Yacht Hub
. It puts the selected
camera into InfraRed mode for night vision and simultaneously switches the IR lamp output ON.
The IR lamp output of the Yacht Hub is controlled by a timer and will switch off after the pre-set
time. The camera will remain in IR mode until de-selected.
Rec Button:
A recorder can be triggered with this button (via the
Yacht Hub
) which will illuminate RED when
a RUN command has been sent. This is also controlled by the timer in the Yacht Hub and the
Содержание Yacht Joystick
Страница 1: ......
