Bradford BALBOA M3, Руководство по установке и эксплуатации

Страница: 7 / 50

Residential Spa
pg. 7
File: RES_Hottub_manual_021116
Introduction
Hot Tub Overview
Bradford’s engineered stainless steel spas come in various shapes and sizes to suit your exact needs.
Your spa will be delivered wrapped in plastic with all plumbing connections clearly labeled for easy
connection to the equipment pack.
The following table provides an overview of the various types of hot tubs and their specifications.
NOTE: Weights are based on Standard Tile package, full tile will weigh more.
Table 2 : Hot Tubs Types and Specifications.
Spa Name Occupants Jets Water Capacity
(Gallons)
Empty Weight
(lbs)
Full Weight
(lbs)
Hanover 6 8/16 380 520 3665
Wilmington 75” 4-5 8 293 400 2850
Wilmington 87” 6-8 8/16 425 500 4040
Hatteras 4-6 8/16 323 400 3090
Hampton 8 8/16 445 594 4297
Carolina 4-6 8/16 324 435 3149
Newport 4-6 8/16 312 435 3049
Topsail 4-6 8/16 375 610 3750
Equipment Pack Overview
The equipment pack included with your Bradford Hot tub contains the pump(s), heater, filter, ioniza-
tion system, and electronics/control module for the spa. The equipment pack will be delivered on a
skid with all of the components pre-mounted and wired. The plumbing connections and stub outs
will be clearly labeled. The equipment pack does not require any special weather protection.
If equipment pack is “Frame Mounted” all equipment will be located under the step section of our
standard hot tubs and will have a skim filter.
NOTE: The components found on the equipment pack may vary depending on your configuration.
Equipment Pack Electrical Information:
• M3 240 volt Outdoor Equipment system
• UL listed for 5.5 kW electric heater, 11 kW electric heater & Natural Gas/Propane
remote heaters.