Bradford BALBOA M3, Руководство по установке и эксплуатации

Страница: 11 / 50

Residential Spa
pg. 11
File: RES_Hottub_manual_021116
Introduction
The following table lists the components on a frame-mount equipment pack.
Table 4 : Components of the Equipment Pack, Sub Assembly ( Frame Mounted )
Component Description
Filter Pump
Waterway Executive 48
#3420820 - 1A, 2hp two-speed motor
230 Volt single phase
Jet Pump
Included only in two-pump spa configurations that support up to 16
hydrotherapy jets. Waterway Executive 48, #3410830 - 1A, 2hp One-speed
motor 230 Volt single phase. For more information, see the manufacturer’s
manual included with your spa.
Custom Stainless
Steel Skim Filter
Consumerables:
20
sq.ft. (2x) Waterway 10 sq.ft. cartridge skim filter - # PW 1110
100
sq.ft. (2x) Waterway 50 sq.ft. cartridge skim filter - # 510-9100
(upon request)
Electronics
/ Control Module
Distributes power from the residence to the other components on the
equipment pack.
Heater Heats the water that is pumped into the spa.
• Electric – Coates 5.5 kW or 11 kW (Heater Upgrade)
For more information, see the manufacturer’s manual included with your spa.
Copper Silver
Ionizer
These items same as standard equipment pack, though located and mounted
directly onto the spa frame and assembly
Cartridge Filter
Light Cord
Bonding Cord
Freeze Sensor
Temperature
Sensor
See Appendix A for the electrical requirements for each equipment pack configuration.