Bradford White RTG 199 MEN, Инструкция по установке и эксплуатации

Страница: 19 / 56

Installation instructions
RTG 199 ME – 6 720 811 615 (2015/04) 19
Fig. 19
[1] Appliance
[2] Condensate drain
[3] Elbow
[4] Hose clamp
[5] Hanger strap
[6] Horizontal run ¼ " rise/ft
[7] May be insulated if necessary
[8] Chimney
[9] Rain cap
[10] Storm collar
[11] Flashing
[12] Silicone seal
4.3.4 Vent connections
Attaching the exhaust and air inlet connection adaptors to the top of
the heater
▶ Attach the flue gas exhaust accessory to the top of the unit fig. 20
(position 1) using the 4 screws and gasket provided, and fully insert
vent pipe into the accessory.
▶ If using 4" venting, a 3" to 4" increaser should be installed directly
after this accessory.
Fig. 20 Exhaust connection
▶ Attach the combustion air inlet accessory to the top of the unit fig. 21
(position 2) using the 3 screws and gasket provided, and install 3" air
intake pipe over the accessory.
Fig. 21 Inlet connection
4.3.5 Connecting the external condensate water drain
Note: Adhesive backing needs to be removed prior to
installation.