DV Series
28
Pull in this direction
Temperature sensor
Insertion stick
Pull in this direction
Honeywell Valve Body Removal and Temperature Sensor Removal (cont.)
Step 4. Remove the temperature sensor from the insertion stick by pulling it apart as illustrated
below.
Step 5. To reassemble the gas control, follow the previous steps in reverse order. Once the gas
control is reassembled, the burner assembly is reinstalled, and the gas supply line is
reconnected, resume water supply to the water heater. Be sure the tank is full of water
before relighting.
Step 6. To resume operation, follow the instructions located on the lighting instruction label, or
the lighting instructions located in the Installation and Operation Manual.
Service Procedure IV
Gas Control Testing and
Replacement (Honeywell ONLY)
28
