DV Series
35
Burner Cleaning
Step 1.
Follow the steps in “Burner
Removal” on page
33.
Step 2. Thoroughly inspect the burner
surface area and the burner port
area and remove any loose
debris.
Step 3. Disconnect burner plate from main burner
orifice and disconnect feedline from burner.
Step 4. Remove main burner orifice from feed line.
Inspect and clean if necessary.
Step 5. Inspect the orifice; clean or replace if
necessary.
Step 6. Reassemble the burner and reinstall into
the water heater.
Step 7. Restore the gas supply and check for
any gas leaks.
Step 8. To resume operation, follow the
instructions located on the lighting
instruction label or the lighting
instructions located in the Installation
and Operation Manual.
Service Procedure V
Burner Operation Inspection,
Cleaning, and Replacement
35
