29
SERVICE PROCEDURE RG-VI
Gas Control Testing, Disassembly, & Replacement
(Honeywell ONLY)
Pull in this direction
Temperature sensor
Insertion stick
Pull in this direction
HONEYWELL VALVE BODY REMOVAL AND TEMPERATURE SENSOR REMOVAL (cont.)
Step 4. Remove the temperature sensor from the insertion stick by pulling apart as illustrated below.
Step 5. To reassemble the gas control, follow the previous steps in reverse order. Once the gas control is
reassembled, the burner assembly is reinstalled, and the gas supply line is reconnected,
resume water supply to the water heater. Be sure the tank is full of water before relighting.
Step 6. To resume operation, follow the instructions located on the lighting instruction label, or the lighting
instructions located in the Installation and Operation Manual.
29
