English
74
Witbox
User Manual
• Do not touch the power cable or other connectors with wet hands. When
connecting the power cable or other connectors to the printer, make sure they
are attached firmly. Do not pull on the cables in order to unplug them from the
printer: instead, grasp them firmly by the plug and pull them out.
• Disconnect the power cable if you are not going to use the printer for an extended
period of time.
• This printer operates at high temperatures and contains moving parts. Do not
touch the extruder or the interior of the printer while it is printing.
• If you need to access the interior of the printer:
◦
Make sure it is fully switched off; i.e. the switch is in the “0” position and the
power cable is unplugged from the mains.
◦
Allow the device to cool if it has been used recently.
• Make sure the front door of the printer remains closed while the device is in
operation and when it is not being used.
• Do not hit or drop the printer.
• Keep the printer on a flat, firm and stable surface.
• Handle and dispose of the consumables with caution.
• Make sure that small 3D-printed objects and other parts that could be hazardous
to children are kept out of their reach.
• Supervise the printing process while the Witbox is in operation.
• To prevent the risk of fire, keep candles and other open flames away from the
printer.
The images and illustrations featured in this manual may not correspond to the final
product. These images and illustrations may be subject to change without prior
notification.
