37
Witbox
User Manual
English
Printing an object
Loading the object
To print a 3D object you must first separate it into layers. Cura allows you to convert
a 3D file into a layered .gcode file. To do this, click the Load button and a window will
pop up where you can select the file you wish to convert (fig. 4.6).
The majority of 3D design programs allow you to save a pre-designed object in
.stl*
format. Cura is able to open the following file types:
.stl*
;
.obj*
;
.dae* and .amf*.
Figure 4.6
Pop-up window to select the object you wish to load into Cura
