English
28
Witbox
User Manual
Unloading the filament
To unload the filament, do the following:
1
Go to
Control > Filament > Unload. The extruder will heat up until it reaches a
temperature of 220 °C. You can monitor the temperature increase on the LCD
screen.
2
Once the desired temperature has been reached, the extruder will extrude
filament for a number of seconds. At this point, the filament can be removed from
the Fibonacci tube manually (fig. 3.25).
Figura 3.25
Unloading the filament
(view from the rear)
