BPM F-15, Инструкция по сборке и руководство пользователя

Страница: 4 / 43

4 5
6. Insert the 6 mm allen wrench (supplied in the kit) into the hole and
tighten the screw clockwise until the stem does not move separately
from the front wheel (Figure 3).
7. Make sure the handlebars are aligned with the front wheel before
tightening, and the stem is not set above the maximum height indicator.
In order to get the bolt securely tight, you may need to use a pair
of pliers for leverage
8. Position the handlebars to your desired comfort level and lock them
into place by pushing the handle back down. If there is movement after
pushing the handle down or it is too tight to push down, you can tighten
or loosen the screw (Figure 4) with a 14 mm wrench provided in your kit.
Continued on Page 12
ASSEMBLY INSTRUCTIONS
For City Commuter and Stretch
Your bike has been pre-assembled and requires only a few simple steps
to get it ready for you to ride:
1. Remove the outside carton after cutting the nylon bands and lift off the
entire box from the tray at the bottom. Carefully remove your bike from the
bottom tray and gently rest it in place with the kickstand down.
2. Remove all of the inside cardboard protection and bubble wrap.
3. Please locate and set aside the kit box containing the battery
charger, pedals, and tool kit.
4. Insert the handlebar stem into the frame of the bicycle. You may
adjust the height of the handlebars by moving the stem up or down to
your comfort level. Place your thumb on the black locking mechanism
on top of the stem, push up and lift the lever up exposing the
adjustment screws (Figure 1).
5. Move the stem so that you can see directly down the hole (Figure 2).
Assembly Instructions Assembly Instructions
Figure 3
Figure 1
Figure 4
Figure 2