BPM F-15, Инструкция по сборке и руководство пользователя

Страница: 11 / 43

18 19
PEDAL ASSIST MODE
For Boomerang Plus, City Commuter,
Interceptor, Stretch & Trail Tracker
Press the power button (top button) on the four button selector
located near the left grip on the handlebars to turn the meter on.
You can adjust the pedal assist power level to have more power by
hitting the [+] button (third button) and can move to a lower level
power by hitting the [-] button (fourth button).
If you set the pedal assist power level to “0”, then the pedal assist
function of the bike is disengaged and the bike can be powered by the
throttle on the right grip. When irst riding your Pedego, you will notice
that when the pedal assist function is activated, the motor will supply
power when you turn the pedals forward.
In pedal assist level 1, you will get assistance at around 40% of the
maximum power from the motor. In level 5, you will get 100% assistance
from the motor. Experiment with the different levels of pedal assist to
become familiar with how much power you want. You will need
different levels of assist for different riding conditions.
When not riding the bike, you can turn off the meter by holding down
the power button (top button) for several seconds.
METER PROGRAMMING & USE
For Boomerang Plus, City Commuter,
Interceptor, Stretch & Trail Tracker
The LCD meter on your Pedego can be programmed
to change various functions.
Hold “SET” for 2 seconds to enter the setup interface.
“SET 1” - Press [-] and the Trip will reset to 0.
“SET 2” - Set the max speed.
“SET 3” - Set the wheel size.
“SET 4” - Set the bike in either MPH or KPH
Hold “SET” for 2 seconds to exit the setup interface.
Press the set button (second button) to switch the display information.
The order is: Trip Distance (TRIP), Riding Time (TIME), and Odometer (ODO).
Press the power button (top button) once while the meter is on to turn on
the backlight, as well as the integrated front and rear lights on the Pedego.
Press it once more to turn the lights and backlight off.
The bars are an indicator that displays the amount of power that is being
drawn from the battery. The more bars that are displayed, the more
battery power is being used to power the Pedego.
After 5 minutes of inactivity, the LCD Meter will automatically turn
off to conserve power.
Operating Procedures Operating Procedures
Your Pedego is equipped with
an LCD meter that monitors pedal
assist, speed, odometer, trip distance,
riding time, and battery energy level.
To turn the meter on, make sure
the battery is fully inserted into the
Pedego and the on/off switch is
in the on “|” position.
Each LCD Meter comes with a
USB port attached to the bottom
of the meter to charge your mobile
devices. Hold down the [+] and set
buttons for 2 seconds to turn on
the USB charging. Hold the same
buttons again for 2 seconds
to turn this feature off.
SPEEDOMETER BATTERY
INDICATOR (V)
PEDAL
ASSIST
DISTANCE/
RIDING TIME/
ODOMETER