BPC HP-206P, Руководство пользователя

Страница: 27 / 37

21
10-15 kVA
Figure 5-1 Standard connection
Figure 5-2 Split (external) by-pass source connection
For Split bypass,
a. Remove the connection between K2, K3 and K4, K5 as shown in figure 7 and 9.
b. Connect the phase and neutral from by-pass source to K2 and K4 terminals.
c. Connect 3 phase input power cable to U1-V1-W1 terminals.
4.4.4 Battery Installation
WARNING!!! Becareful while connecting batteries.
ATTENTION!!! Remove the battery fuse before making the connection of the battery circuit breaker box
during the battery installation.
The batteries associated with the UPS equipment are usually contained in a purpose-built battery cabinet,
which sits alongside the main UPS equipment. Sealed, maintenance-free batteries are normally used in this
type of installations.
Where battery racks are used, they should be sited and assembled in accordance with the battery
manufacturer’s recommendations. In general, batteries require a well-ventilated, clean and dry environment at
reasonable temperatures to obtain efficient battery operation.
In general a minimum space of 10 mm must be left on all vertical sides of the battery block. A minimum
clearance of 20 mm should be allowed between the cell surface and any walls. A clearance of minimum150
mm should be allowed between the top of the cells and the underside of the shelf above (this is necessary for
monitoring and servicing the cells). All metal racks and cabinets must be earthed. All live cell connections
must be shrouded.
1. Unpack each battery and check its terminal voltage. If any battery has terminal voltage less than 10,5 V it
must be charged before continuing.
2. Please check the battery connecting hardware.
3. Please locate suitable number of batteries at each rack.
4. Start locating the batteries from top to the bottom on the racks.
5. Becarefull about the connection between the racks and polarities.
To be removed part To be removed part