Boyens Backservice Jelly economy, Инструкция по эксплуатации

Страница: 25 / 41

Cleaning, maintenance and maintaining
25
Jelly economy Edition: 01.10
5.5 Opening the implement housing
The implement housing may only be
opened
•
by skilled technical personnel (skilled
electrician).
•
when it is not connected to the
electric
power supply and not
pressurised.
•
when it is cold.
You need to open the implement
housing before you
•
remedy leaking compressed air
connections.
•
activate the safety switch.
•
exchanging the silencer.
•
exchanging the pressure switch.
•
exchanging the agent-hose.
•
exchanging the agent-feed-pump.
In case of queries, please do not hesitate
to contact our after-sales service.
- Disconnect the coupling plug between the jelly
container and the suction-hose. Refer to chapter
"Connect the one-way jelly container BIB", page
14.
- Go on spraying your pastry until only an jelly-air-
mixture will emerge the spray gun.
- Switch off the implement.
- Pull the power supply plug out of the socket.
- Actuate the spray gun and thus discharge the
residual air pressure out off the system.
- Remove the jelly container.
- Remove the screws (4 pieces) between the
housing hood (1) and the housing bottom (2).
- Pull the housing hood (1) upward carefully.
- Swivel the housing hood (1) to the front by 90°.
Placing the housing hood.