Boxym B-820 mini Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 49

Boxym B-820 mini Скачать руководство пользователя страница 2

Mini Handheld Pulse Oximeter

Disclaimer Statement

The company does not in any form guarantee the errors in this manual, installation errors and operator
errors, and does not assume any legal liability for incidental or consequential damages.
The contents contained in this manual are protected by the copyright law. All rights are reserved, and
without prior written permission of the company, any part of this manual can not be reproduced,
photographed, copied, or translated into other languages.
The company only considers to be responsible for the reliability, security and performance of the
instrument under the following circumstances, namely assembly operation, expansion, readjustment,
performance improvement and repair, all of which are performed by the personnel or institutions
authorized by the company; relevant electrical devices are in line with national standards; the instrument
is operated in accordance with the guidance in this manual.
The contents of this manual may be changed without notice.
Before using the product, please read the contents of this manual carefully for proper use of the product.
Please keep this manual after reading it, so as to access at any time when needed.

Foreword

This manual describes in detail the purpose, function and operational use of the product. Before using
this product, please carefully read and understand the contents of this manual to ensure proper use of
this product can be, and to ensure that the patient and operator safety.

The manual introduces this product according to the most complete configuration, so some contents
may not apply to your purchased product. If you have any questions, please contact with the company.

Please place this manual near the product, so as to be able to convenient and timely access when

needed.

Applicable objects

This instrument is suitable for home users or professional clinical staffs, and users shall read the manual
carefully before using this instrument.

Illustrations

All illustrations in this manual are provided only for reference, and settings or data in the illustrations may
not be entirely consistent with the actual display you see on the product.

Warranty and maintenance services

Scope of Free Services:

«
1
2
3
4
...
»

Содержание B-820 mini


















































Отзывы:

Нет отзывов