BOXER 322D Скачать руководство пользователя страница 55

Страница: 55 / 89

Routine Service and Maintenance

4.2

Daily Maintenance Procedures

Do the following procedures daily or every 10 operating hours:
1. Check condition of all warning and instructional decals. Before operating the machine,

replace any missing or damaged decals.

NOTE

: Make sure to read and understand all WARNING and SAFETY decals before

operating the machine.

•

Allow engine to cool before filling fuel tanks.

•

Do not overfill because fuel could spill onto hot engine parts and ignite or

explode.

•

Make sure engine is turned off.

Check engine fuel and fill as needed:

a. The Boxer has one saddle tank (Item 1,

Figure 4–1

), on the left side of the machine.

Figure 4-1 Fuel Level Check

The fuel tank has a fuel gauge located in the filler cap (Item 2,

Figure 4-1)

. Remove cap

and visually inspect fuel level to make sure that the indicator is showing the proper fuel

level. Make sure that the tank has been filled on a daily basis.

Carefully pour diesel fuel into the tank, not exceeding the max fill indication shown by

the gauge in the fuel cap.

CAUTION

Содержание 322D


























































































Результаты поиска

Содержание 322D

Отзывы:

Похожие инструкции для 322D

Бренды по названию

Популярные бренды

BOXER 322D, Руководство оператора

Результаты поиска

Содержание 322D

Отзывы:

Похожие инструкции для 322D

Бренды по названию

Популярные бренды