manualshive.com logo in svg

Bowflex TreadClimber TC5, Руководство по обслуживанию, Страница: 9 / 33

Поделиться
Скачать
Bowflex TreadClimber TC5 Скачать руководство пользователя страница 9

9

5. Using a 16 mm wrench, loosen the Belt Tensioner Bolt until the Drive Belt is 

slack.

Note: 

Count the visible Belt Tensioner Bolt threads before loosening to assist with 

reassembly.  

6. Turn the Drive Pulley clockwise while forcing the Drive Belt to the outside. Belt 

will come off of the Drive Pulley and Rear Roller Pulley.

Keep fingers out of any pinch opportunities when turning the Pulleys.

Note: 

Chain guard is not shown in images. 

7. Wrap the new Drive Belt around the Rear Roller Pulley. Start the Drive Belt on 

the Drive Pulley and roll it in a clockwise motion. Be sure the Belt does not come 

off of the Rear Roller Pulley.

Keep fingers out of any pinch opportunities when turning the Pulleys.

8. Roll the Drive Pulley clockwise until the Drive Belt is fully installed. Continue to 

roll the Belt forward while adding side pressure with fingers to align as necessary.

9. Replace the Left Side Cover and secure with screws.

10. Replace the Rear Cover and secure with screws.

11. Replace the Front Cover and secure with screws.

 

Drive Pulley

Belt Tensioner Bolt

Chain Pulley

Rear Roller

Pulley

Содержание TreadClimber TC5


































Отзывы:

Нет отзывов