7
Replacing the Console Assembly / Console Shroud
!
To reduce the risk of electrical shock or unsupervised usage of the equipment, always remove the batteries from the machine and wait 5
minutes before cleaning, maintaining or repairing the machine.
Tools Required: #2 Phillips Screwdriver, 5 mm hex wrench
Note:
If only replacing the Console Shroud, use the Console Top with Electronics
Assembly replacement instructions to transfer the electronics to the new Console
Shroud.
1. Disconnect the Speed Sensor Cable from below the Console Assembly.
2. Remove the Speed Sensor Cable from the tabs on the the Console Assembly.
3. Remove the 6 indicated screws from the Console Assembly using a 5 mm hex
wrench.
4. Lift the Console Assembly off of the Junction Covers and Uprights.
Note:
Be aware of how the Speed Sensor Cable routes through the Console As
-
sembly for replacement purposes.
5. Installation is the reverse procedure.