5
Console Service / Setup Mode
From the Power Up/Idle Mode, push and hold the START/STOP and SCAN butons for 3 seconds to access the Console Service/Setup
Mode.
Display
Option
Description
UnIt
Units
Select your preferred unit of measurement; “Lb” =
English Imperial, “SI” = metric
StAt
Statistics
Displays the total time, calories, and distance the
machine has been used since it was activated or
the last reset.
Note: Push and hold the SCAN button to reset and
erase the statistics.
COdE
Firmware Version
Displays the firmware version
bAtt
Battery Voltage
Displays the percent of battery power remaining
EdgE
Speed Detection
Select between modes; “0” = 1 point, “1” = 2 points
Push the SCAN button to cycle through the Options, and push START/STOP to select the Option.
Use the SCAN button to view the details of the Option, and push the START/STOP button to confirm your selection. For options without
details to cycle through, push the START/STOP button to exit the option.
To exit the Console Service/Setup Mode, push and hold the START/STOP button for 3 seconds.
Note:
The fitness machine can not be immediately shut off from the Console Setup Mode. The user must exit Console Setup
Mode, and then push and hold START/STOP for 3 seconds.