Bowflex LateralX LX3, Руководство по обслуживанию

Страница: 44 / 54

44
11. Remove the indicated screw and nut:
Note: The hardware is very tight
(factory installed).
LX3/LX3i—Use two 8” or longer adjust-
able wrenches (or M24 socket wrench
and 24mm box wrench). Pivot the Swing
Arms toward the front and remove the
Mid Pedal Arms.
LX5/LX5i—Use an M24 or 15/16” socket
wrench (inside of arm) and 24mm open
end wrench or adjustable wrench (outside of arm). Pivot the Adjustable
Arms toward the front and remove the Mid Pedal Arms.
12. Using a #2 Phillips screwdriver, remove the 5 indicated screws from
the Right Lower Shroud. Carefully remove the old Right Lower Shroud
and set it safely aside.
If you are only replacing the Right Lower Shroud, go to step 17.
If you are replacing the Left Lower Shroud, continue to step 13.
13. Using a 17mm open end wrench, loosen and remove the indicated nut
from the Left Lower Shroud. Carefully pull the Power Inlet plug out of the
hole toward the inside of the Shroud.