Bowflex LateralX LX3, Руководство по обслуживанию

Страница: 38 / 54

38
13. Remove the Base Assemblies one at a time and set them safely
aside for reassembly. Set the old Engine Assembly safely aside.
This step requires two people.
Note: It may be helpful to tilt the machine to the side or put a static
solid object (like a book or box) under the front mount tube in
order to slide the Base Assemblies off the mount tubes.
14. Carefully turn box on long side and cut the packing tape on the bottom
of the box.
15. Fold the flaps out to expose the shipping platform and tip the box
upright.
This step requires two people.
Note: Be sure to fold the bottom flap under the
Box so that the shipping platform will rest on
the floor.
16. Lift the box off the contents. Using a Phillips screwdriver, remove the
protective sheet from the base mount on top of the Engine assembly. Cut
off the zipties that attach the Engine assembly to the shipping platform..
NOTICE: Do not remove the platform until the Base
Assemblies are attached in order to prevent
damage to the floor.
Ziptie