v
Note to Installers
This equipment complies with the FCC Regulation for Class A devices, Subpart J of Part 15. Shielded, grounded interface cables were used on all ports for FCC radiated
emission testing.
Only qualified service personnel should perform installations.
The manufacturer is not responsible for any violation of the FCC Regulation for Class A devices that is caused by unauthorized modification of the equipment, or caused by
equipment installation not in accordance with the instructions in this manual.
This equipment generates, uses, and can radiate radio frequency energy and may cause radio or television interference. All user equipment that interfaces with other products
should be connected with shielded cables. (Contact a local dealer for more information on shielded cable assemblies and their availability.)
There is no guarantee that interference will not occur. If radio or television interference occurs (this can be determined by turning the equipment off and on while the radio
or television is on), the user is solely responsible for correcting the interference and is encouraged to take one or more of these measures:
•
Reorient the receiving antenna.
•
Relocate the equipment, or move the equipment away from the receiver.
•
Plug the equipment into a different outlet so the unit and receiver are on different branch circuits.
•
Consult the dealer or an experienced radio/television technician.
It is also suggested that the user read the FCC booklet entitled “How to Identify and Resolve Radio-TV Interference Problems.” The booklet is available from the
US Government Printing Office, Washington, DC 20402. (When ordering the booklet, specify stock number 04-000-00345-4.)
Site Preparation
The screen display geometry on terminal products is aligned using magnetic devices. External magnetic fields created by other types of electronic equipment, such as
printers, in very close proximity to the terminal, may cause minor display distortion.
Examples of display distortion include:
•
Shaky video
•
Wavy lines
•
Tilted display
This magnetic field interaction only occurs over a very short distance, normally less than twelve inches, and can be corrected by separating the equipment and/or
slightly reorienting the display.
Preface
This product conforms with the protection requirements of EU Council Directive 89/336/EEC on the approximation of the laws of the Member States relating
to electromagnetic compatibility.
Boundless Technologies cannot accept responsibility for any failure to satisfy the protection requirements resulting from a non-recommended modification of the
product, including the fitting of option cards not made by Boundless Technologies.
This product had been tested and found to comply with the limits for Class B Information Technology Equipment according to CISPR 22/European Standards
EN 55022. The limits for Class B equipment were derived for typical environments to provide reasonable protection against interference with licensed
communication devices.
This manual contains all the information necessary to install, set up, and use an ADDS 60 terminal.
More detailed information on programming with control codes and escape sequences, default strings and character sets, international language support, etc. can be
obtained by calling the following numbers:
•
USA and Canada: 1-800-231-5445
•
International: 1-631-342-7400
At the options menu, press 2 for “Product Information.” Then press 2 for “Products or Program Information Mailed to You,” and request the following:
260xx Programmer’s Reference Guide
Part Number: 598-0005035
This manual is offered to our customers at no additional charge. When calling to order, please have your terminal’s
serial number
available.
Содержание ADDS 60
Страница 1: ...Boundless Technologies User s Guide...
