31
Edit Fields
Setup uses overwrite mode in text editing fields. That is, the cursor keys cannot be used to move to a location in the text to insert characters. Upon entry to a text
field, the cursor is placed at the last text location. Use the following keystrokes:
•
Backspace
– move cursor left by deleting that character.
•
Shift+Backspace
– reset the field to its default value.
•
Alphanumeric keys
– enter text in the normal, shifted, or control states. To generate a control character (00h - 1Fh) add 40h and use Ctrl with the
character in the new position (40h – 5Fh). For example, to insert CR-LF (0Dh, 0Ah) codes, press Ctrl+M, Ctrl+J (4Dh, 4Ah). You can also use the
compose and meta functions to generate 8-bit characters.
Glossary of Terms
Some of the terms that are used in the Exec (PrtSc) menu are defined below.
Page Reset
Page resets are executed when the session or terminal is reset or defaulted. When a page reset is performed, it affects all pages, and the following events occur: the
page is erased, the cursor is homed, and scrolling regions are defaulted. All line attributes (such as double-high/wide, locked lines) are reset to normal. Split screens
are cleared to a normal, single screen and protect mode is turned off.
Terminal Parameters
Terminal parameters include session parameters (defined later) and non-session parameters that affect the terminal globally without regard to the session. The
non-session parameters and their defaults are listed below:
•
Setup Parameters: Bell Volume (6), Screen Saver (5 min), Overscan Borders (on), Language (U.S.), Keyclick (on), EIA(Aux) Baud Rate (9600), EIA (Aux)
Data Format (8/1/N), EIA (Aux) Parity Check (off), EIA(Aux) Rcv Prtcl (Xon-Xoff/XPC), EIA (Aux) Xmit Prtcl (none), EIA (Aux) Break (250 ms),
EIA (Aux) Xmit Pace (baud), EIA (Aux) Disconnect (2 sec), EIA (Aux) Modem Control (off), Session Display (full), Emulation Display (full), Refresh
Rate (70 Hz), Bright Video (off), Enhanced Attributes (on), Setup Language (U.S.), Sessions (1), Caps Lock (Toggle), Num Lock (Toggle), Key Repeat
(On), Speed (fast).
•
Desk Accessory Parameters: Clock Display (off), Clock Type (12 hour), Clock Location (column 48), Date, Time (not saved) , Alarm Time (12 PM), Tone
(alarm/hourly), Calculator (printer off, tape on), and the row and column in which each accessory is displayed.
Emulation Parameters
Emulation Parameters are parameters that are specific to the emulation selected in the current session. These include three types of parameters: Setup-Edit keys,
Setup, and Modes.
•
Setup-Edit Keys:
Function and Edit keys and the Answerback message.
•
Setup Parameters:
All other Setup variables that are not included in Setup Parameters in Terminal Parameters (all global settings).
•
Mode Parameters:
Variables that are used by a emulation’s emulation, but are not selectable through Setup. Some examples are Protect Mode, Graphics
Mode, Insert Mode, Aux Mode, Split-Screen, Transparent Mode, Character Set mappings, Setup Language, and Sessions.
Содержание ADDS 60
Страница 1: ...Boundless Technologies User s Guide...
