Print Menu (F8)
Print Mode:
Normal, Auto, Controller
Choose how printing is controlled:
Normal indicates that printing is to occur when a print request (such as print screen) is received.
Auto prints a line when the terminal receives a LF, a FF, or a VT code, or when autowrap occurs.
Controller indicates that host data is sent to the printer (pass through mode). The host computer controls printing.
Print Block Term:
<ETX>, <CR>
Choose the character that tells the printer that the block of data to be printed has ended.
Or
Print Block Term:
None, <FF>
Choose the character that tells the printer that the block of data to be printed has ended.
Print Region:
Screen, Scroll
Indicate the region of the screen that is to be printed: the entire screen or a certain section of it called the scrolling region. A scrolling region is a limited portion of
the screen which applications (such as word processors) may designate to be the user’s.
Print Line Term:
<US>, <CR><LF>
Indicate the character that <R>is to terminate a line of print.
Secondary Recv:
Off, On
When you choose On, the data received from the serial printer goes to the port assigned for the host. This data does not appear on the screen and is
transparent to you. When you choose Off, the data received from the printer port is ignored.
Emulation Menu (F9)
The parameters displayed in this menu depend upon the current emulation. This section is divided between parameters for ASCII and ANSI emulations.
ASCII Emulations
Page Edit:
Off, On
When page edit is on, edit features such as insert act upon text to the end of the current page.
WPRT Intensity:
Dim, Normal, Suppress
Choose the intensity of write protected characters . Suppress indicates that the character’s foreground is the same as its background with the effect of
“suppressing” output.
WPRT Underline:
Off, On
Choose whether write-protected characters are underlined.
WPRT Blink:
Off, On
Choose whether write-protected characters blink.
WPRT Reverse:
Off, On
Choose whether write-protected characters display in reverse video.
Fkey Speed:
Fast, Normal
Choose the speed at which function keys and labels are programmed by the host. Fast mode increases the speed for Wyse 50 compatibility but limits the
amount of space in each function key and answerback message to 8 bytes. The edit keys are not available for programming in fast mode. Changing this
selection changes the defaults for all the function keys, edit keys, and function key labels.
Save Labels:
Off, On
When on, labels that are downloaded by the host will be saved in non-volatile memory. If this selection and Display NV Labels are off, labels written by the
host would be lost upon entry and exit to Setup.
Attribute:
Char, Line, Page
Choose the extent to which attributes are propagated. (The only parallel ASCII emulations are PC Term and Wyse 60.)
Display NV Labels:
On, Off
Choose whether the labels in non-volatile memory appear on the lowest line. When you choose Off, any existing labels remain on the screen until you select
On, when they refresh. On a 26-line screen, they appear below line 24. On a 44-line screen, labels appear below line 42. On a 52-line screen, they appear below
line 50. (The top line is the top status line and cannot be used for data.) If the page length used is a multiple of 25 (instead of 24) and the screen length is 26
lines, then the last data line is used for data and labels do not appear, regardless of this setting. The same is true for a page length that is a multiple of 43
(instead of 42) with a screen length of 44 lines.
Status Line:
Standard, Extended, Off
26
Содержание ADDS 60
Страница 1: ...Boundless Technologies User s Guide...
