14
STEP-BY-STEP
GUIDE
0800 003 006
/
boundaryline.co.nz
ADDITIONAL
INFORMATION
STEPPING METHOD 2 –
RAKE/CUT YOUR BOTTOM PANEL TO THE SLOPE USING
1800MM WORTH OF WALL PANELS
You will maintain a maximum height of 1800mm wall height – As pictured below it should be noted that your wall height
at the high side of the slope will be reduced by the amount of the rake – in this situation 100mm.
Cut panel to suit the slope of the ground
Support bracket height = Normal
placement for a 1800mm wall on
both sides of the post
Insert end post infill here
Insert end post infill here
Example of a 100mm fall over this distance
1800
1700
100
Cut
800
900
Cutting of a panel to suit a 100m rake/slope.
NOTE:
-
On a large rake/slope a longer base channel maybe required.
ADDITIONAL
INFORMATION
