Page 40
37355-0-0217
PROFLAME - IP CONTROL SYSTEM
TECHNICAL DATA
Remote Control
Supply voltage
4.5 V (three 1.5 V AAA batteries)
Ambient temperature
ratings
0-50°C (32 - 122°F)
Radio frequency
315 MHz
RECEIVER
Supply voltage
6.0 V (four 1.5 V AA batteries)
Ambient temperature
ratings
0-60°C (32 - 140°F)
Radio frequency
315MHZ
WARNING
The transmitter and receiver are radio frequency devices.
Placing the receiver in or near metal may severely reduce
the signal range.
ATTENTION
•
Turn off the main gas supply of the fireplace during
installation or maintenance of the receiver.
•
Place the receiver's 3-position slider switch in the off
(down) position during installation or maintenance.
•
Turn off main gas supply to the fireplace prior to removing
or reinserting the batteries in the receiver.
TRANSMITTER (REMOTE CONTROL WITH LCD DISPLAY)
The Proflame Transmitter uses a streamline design with a simple
button layout and informative LCD display.
See Figure 62.
The Transmitter is powered by 3 AAA type batteries. A Mode
Button is provided to Index between the features and a
Thermostat Button is used to turn on/off or index through
thermostat functions.
See Figures 62 and 63.
Blue LCD Display
UP/DOWN Arrow Button
ON/OFF Button
THERMOSTAT Button
MODE Button
Figure 62
- Proflame Transmitter
The receiver may need to learn the transmitter. Press “learn”
button on the remote receiver followed by the power ON/
OFF button on the transmitter. A series of beeps will signal
communication has been made.
Figure 63
- Transmitter LCD display
RECEIVER
The Proflame Receiver
(Figures 64 and 65)
connects directly
to the gas valve and stepper motor with a wiring harness. The
Receiver is powered by 4 AA type batteries. The Receiver
accepts commands via radio frequency from the Transmitter to
operate the fireplace in accordance with the particular Proflame
system configuration. The Receiver three position slider
switch can be set to one of three positions: Up for ON (Manual
Override), middle for Remote (Remote control) or down for OFF.
REMOTE
SWITCH
LED SWITCH
ON-OFF
LED SWITCH
COLOR MODE
COVER PLATE
Figure 64 - Proflame Receiver Body Front
REMOTE SWITCH
14-PIN CONNECTOR
COVER PLATE
Figure 65 - Proflame Receiver Body Back
