DOC: BOS0295
User Manual PD301 Play Detector
10
Keypad Functionality – Wireless Torch
The wireless torch is programmed with the same standard safety feature as the hardwired
torch to prevent accidental operation of the Play Detector. But in addition, to save power,
the torch will automatically switch off completely after eight minutes of inactivity. In this
condition, the green power LED will not be lit.
To reactivate the torch, the lamp ON/OFF button must be pressed. The green power LED
will now show and the lamp will switch on. To activate the control buttons, the SAFETY
button must also be pressed to illuminate the PD LED as before. The operation is now the
same as the hardwired version above.
The BATT LED will show when the torch battery requires charging. In this case, the torch
should be placed in the charging cradle and allowed to charge. Charging is signified the
flashing of the BATT LED and when fully charged, the BATT LED is switched off.
The optional wireless torch operates using radio frequency on the FM band. It has a
maximum operating distance of 50m when fully charged and a charging time of
approximately eight hours. Under constant use the operating time is approximately 1.5 hours
without charge.
To ensure the wireless control is always ready for use, place it on the charger when not in
use.
Lamp ON / OFF
Move LEFT
Move RIGHT
Rotate LEFT
Rotate RIGHT
Remote Control Torch
Charge Pin
SAFETY release