Boston Acoustics SPOT Скачать руководство пользователя страница 49

Страница: 49 / 55

R 2.0

V A

Robot won’t

turn on

Motors won’t

turn on

Perception

won’t turn on

SER

VICE & REP

AIR

TROUBLESHOOTING

Errors affecting Spot’s operation will be visible
on the controller. Controller icons turn yellow for
warnings and red when serious errors occur. The
robot’s status lights will also flash orange to alert
operators of any serious error.

To document errors, take a screenshot of the
controller screen with the error dropdown
menu selected.

TRY THIS FIRST

The robot operator may be able to fix certain
errors by turning the robot off and on again.

NOTE

: When the robot is cold, some

functions may not work. Let Spot warm up

to room temperature for an hour and then

power it on.

STARTUP ISSUES

CONTACT SUPPORT

If error persists after rebooting robot, robot
needs maintenance, or other issues occur,
contact robot support.

Email:

[email protected]

Include:

•  Robot SN (located in battery compartment)
•  Issue
•  Repeatability of issue

• Press battery’s SOC

button to check battery
level. If charge level is
one or two bars (less
than 40% charged),
swap battery.

• If battery is too warm

(due to charging or
heavy use), robot won’t
turn on, even when fully
charged. Swap in cool,
fully charged battery.

• Remove battery and put

it back in.

• Check if Spot‘s legs are

tangled or at extreme
angles, then adjust Spot
to even seated position
and try again.

• Turn robot off and

on again.

Содержание SPOT























































Результаты поиска

Содержание SPOT

Отзывы:

Бренды по названию

Популярные бренды

Boston Acoustics SPOT, Руководство пользователя

Результаты поиска

Содержание SPOT

Отзывы:

Бренды по названию

Популярные бренды